In part, it accounts for more than half of the total cost of the conveyor, so it is particularly important for how to maintain and maintain the conveyor belt of the assembly line in daily operations. The maintenance of a very common conveyor belt that our technicians are going to analyze today is a nylon conveyor belt.

The maintenance and maintenance of nylon conveyor belts are mainly as follows:

1. The feeding direction should follow the running direction of the tape. In order to reduce the impact on the tape when the material falls, the chute should be used to reduce the material drop distance; the tape receiving section should shorten the roller spacing and use buffer rollers as leakage material. The belt should adopt a soft and moderate material barrier plate to avoid the fender plate being too hard and scratching the belt surface of the conveyor belt.

2. Conveyor belts of different types and specifications should not be connected together, and the joints are best glued.

3. The running speed of conveying tape should generally not be greater than 2.5 meters/sec. Materials with large block size and high wearability and unloading devices that use fixed pears should be used at low speeds as much as possible.

4. The following matters should be paid attention to during use of the conveyor belt: ① Avoid the roller being covered by materials, causing ineffective rotation, prevent leakage of materials from being stuck between the roller and the tape, pay attention to the lubrication of the movable part, but do not oil-filled conveying tape; ② Avoid starting with load; ③ The tape is off-limited, and measures should be taken to correct it when applied; ④ The tape is found to be partially damaged by artificial cotton when applied to avoid enlargement;

5. The relationship between the diameter of the conveyor's transmission roller and the conveyor belt cloth layer, the matching of the transmission roller, the redirection roller, and the requirements for the roller groove angle should be reasonably selected according to the design regulations of the transporter.

6. The type, structure, specifications and number of layers of conveying tape should be reasonably selected according to the conditions of use.

7. During storage, the warehouse temperature should be kept between 18-40℃, and the relative humidity should be kept between 50-80%.

8. During storage, the product must be placed in rolls and must not be folded. It should be turned once a quarter during storage.

9. During transportation and storage, the conveying tape should be kept clean and avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and be one meter away from the heating device.